Cleanup In The Shuttle Aisle

I don’t actually have a shuttle aisle, but I have a messy craft room that needs to be cleaned up. While going through things in my craft room I came across a bag that had a lot of miscellaneous itmes in it, including a bunch of shuttles. I need to “clean up” all of these so I can use them for other things!

Shuttles and other stuff on wandasknottythoughts
Shuttles and other stuff

Almost all of these shuttles were partially wound. Some of the threads I recognize and can match, but others are shades that are not so easily done. So what to do with them?

Some shuttles had more thread than others. There was enough on most to do more than single ring flowers and four ring butterflies, which are my go-to for snippets of thread left on shuttles. The little flowers and butterflies can easily be added to cards and notes. I did finish off a couple of shuttles with these.

Flowers and butterfly tail ends on wandasknottythoughts
Flowers and butterfly tail ends

But the ones with a bit more thread I put on buttons. The two small buttons are just doodles, simple things just to get around the button. These work well as accents on bags and collars. Or just to do with no purpose other than the joy of making them.

Buttons and doodle on wandasknottythoughts
Buttons and doodle

The two-color button is trying to recreate the decorated grey button that I did a couple of weeks ago. I made a couple of changes that seem to change the overall look of it, not what I had in mind. But I ran out of one of the blues. And I have a lot of threads that are shades of blue. It may be hard to match it and finish it.

The metallic doodle was not started with shuttles found in the bag. This was an idea that I got when I found the doodad in the middle as I was looking through other things in my craft room. I started it before I made last week’s decorated button. I haven’t decided if this is done or not.

I really need to do more cleanup in my craft room than I need to with the shuttles. But the shuttles are more fun!

“You never know what you have until you clean your room”

Nothing as planned

Since I finished the 10 point coaster I’ve not decided what I want to do next. I keep thinking I should keep a physical list, maybe digital, of things I want to tat, but I haven’t yet. When I’m in the middle of projects I think of all kinds of things I want to do when I’m done, but when I’m done I go blank. And that’s where I’m at now.

I’ve been seeing a lot of decorated buttons lately, and I have several buttons that would be good centers. I did work on one, without any pattern or plan. It doesn’t look bad but it didn’t turn out all that great.

Decorated button in greys on wandasknottythoughts
Decorated button in greys

I miscalculated stitch counts so my (vague) idea didn’t come out as I thought it might. I’ve been debating with myself if I should do another round and see where that takes it, but I’ve not decided which side has won yet, to do it or not. It is made in Lizbeth #607 Charcoal Med and #190 Silver Ice, which did not come out well in the picture.

I also started a little something in a couple of the Lizbeth Metallic threads #311 Silver and #320 Steel Blue I recently got from Tatting Corner. I had another vague idea about what I wanted to do with these but very soon took a wrong turn.

Metalic doodle on wandasknottythoughts
Metallic doodle

When I realized my thoughts had gone astray, I went ahead and finished it, sewed in the ends. I might use this as an accent on a card or something, no reason to throw it out. This picture doesn’t do the metallic threads justice at all, they work well together. I’ll be using this combination again.

I like working with the Lizbeth Metallic threads but threading a needle with them to sew in the ends is somewhat problematic. You can see in the picture how they separate. Which makes me glad I have a Clover needle threader.

Clover needle threader on wandasknottythoughts
Clover needle threader

Using this makes threading a needle with the metallic threads easy. I keep it on my tatting tool keeper all the time even though I don’t use it often.

Tatting tool keeper on wandasknottythoughts
Tatting tool keeper

I use this tool keeper instead of a chatelaine. All the tools are on a badge reel, so I don’t have to take it off to use any given tool and it doesn’t hang in the way when I’m not using them. I also don’t drop anything on the floor and lose them, lol!

I do not make anything for mentioning Lizbeth threads of Clover tools.

“Without leaps of imagination, or dreaming, we lose the excitement of possibilities. Dreaming, after all, is a form of planning.” Gloria Steinem

https://www.brainyquote.com/quotes/gloria_steinem_121278

Thread ends

When a project is finished I have three choices for thread left on a shuttle: 1. Figure out something to tat with it until it’s gone; 2. Leave it on the shuttle and use another shuttle for the next project; or 3. Unwind it, putting the thread on a card or bobbin.

Of these choices, I like to do #1 the most, #2 if I’m lazy and have other shuttles available, and #3 only if I have to. With the left-over thread from the goat, I chose to do #1.

thread ends on wandasknottythoughts
Thread ends from the thank-you goat

The doodles I did in Lizbeth River Blue Dark in size 10 to finish off the thread from the shuttles.

Normally, any doodles I do from thread ends are put in a jar. When I want to add a little something to a letter or note I can usually find something in this jar that works. This time, I added a couple of these doodles to the goat before I mailed it off.

Thank-you goat for the Pushy Goat on wandasknottythoughts
Thank-you goat for the Pushy Goat with a couple of doodles

I like how this turned out. I hope my message therapist likes it, too.

This post was supposed to go up last week, but I didn’t do something quite right. We were on vacation last week and I didn’t check to make sure if it posted or not. The good news is I have pictures to share next week!

A close family member once offered his opinion that I exhibit the phone manners of a goat, then promptly withdrew the charge – out of fairness to goats.

Jeffrey Kluger

Tatting when you’re bored

At work the other day I was waiting on decisions to be made and changes to be done by a couple of other people.  I was listening and doing my part in the job but only so many people can fit in one small area at a time.  While standing there I noticed a few thin wires on the floor that had been the tail of some cable or other.  As they hadn’t quite made it to the trash yet I picked them up and started fiddling with them instead of throwing them away.  Noticing the size, color and length I tried tatting with them.

tatting with wire on wandasknottythoughts
When you’re bored you’ll tat with anything

I made the ring on the right first, then a smaller ring that didn’t close.  With another couple of scrap wires, one green the other white, I made the rings with the chain between.  I even joined the rings though I had not left a picot.  There was still a lot of white wire left which I wound around the wire tails of the first two rings.  I did not try tatting that part, my fingers were already feeling the strain of working with wire.

No, I did not use a shuttle to work with the wire, I finger tatted it.  The shuttle is only for reference to the size of the wire tatting.  The wire is about 24 gauge but due to the stiffness does not tat small.  I made the white chain using direct tatting but the rings I did normally.

I knew that tatting with wire could be done; I’ve tried before but never with coated wire.  It was challenging but fun.  I don’t think I’d want to make any large project out of it though – talk about hard on the hands!

“Nobody is bored when he is trying to make something that is beautiful, or to discover something that is true.” William Ralph Inge                                                       www.brainyquote.com