I finally found the thread I started this bookmark with. Unfortunately, the label came out. I know this is Lizbeth size 20, and I think it’s color #646 Purple Iris Lt.
This piece works up with a bit of a wave to it. After spraying with water, a few pins in certain areas tame it. A ribbon down the center, over and under the rings in the middle, would look nice in it. I even have the correct number of holes to keep the ribbon on the backside at both ends. Will wonders never cease?
I have two more UFOs handy that I plan to work on, but I also have a couple of things I want to make before Easter. I’ll have to keep my eye on the calendar so I don’t procrastinate too long on those.
It’s only one week until International Tatting Day, April 1st. Right now I do not have any plans to TIP (tat in public) that day. But it is a week away and a lot can change by then. Do you have any plans for ITD?
“Can anything be sadder than work left unfinished? Yes, work never begun.” Christina Rossetti
I spent most of Tuesday in a waiting room while my mother underwent a medical procedure. It was supposed to be at 9:30 A.M. but of course they want the patient there early. I arrived at 8:30 A.M, a little late to see her as they took her to the back at 8:00 A.M.
And then we waited. And waited. And waited. They finally started the procedure at 12:10 P.M.
Then we waited some more while the procedure was done. Which took two hours.
Then we waited some more while she was in recovery.
I have been making a few bookmarks to refill my gift supply. Most recently it has been the Graduation bookmark in Lizbeth Grape Pizzaz size 20. I’d finished one in it and begun another. This thread is what I had in my purse Tuesday morning. The only thread I had in my purse.
Finishing the cross was the first thing I tatted in the waiting room. I could have done another one – or two, or three – during the wait but I chose to do other things.
Tatting around the button was because, um, I had the button. The butterflies and flowers as small things I make when there isn’t much thread left on the shuttles. I use these on letters and notes to brighten them up 🙂 A clear glass gem from the bottom of my tatting bag became an Ice Drop. Thanks to Diane for having the information on her blog to refresh my memory on how to make them!
I took quite a few breaks from tatting during the waiting for lack of a strategy for the day. If I’d had a large project with me a lot could have been accomplished. Alas, I didn’t have much of a plan for tatting, so was unprepared. How odd of me. This was not a surprise procedure, I should have had a better plan.
The good news is my mother is doing well. She’ll have to take things easy for a while, but she is at home where she can be comfortable.
I have found several UFOs I should work on. I’ve also started a list of things I want to tat. Hmm, which will it be?
“Don’t wait for the perfect moment. Take the moment and make it perfect!”
I usually keep several tatted bookmarks on hand for small gifts to go inside cards. These are for condolences, just-because, (forgotten) birthdays, or other special occasions. Recently I’ve found I don’t have any bookmarks made. Oops, I need to get busy!
I made my ‘Branson’ bookmark in Lizbeth Caribbean size 20. This one is easy to do while a passenger in the car on the way to work. I already had one shuttle which needed to be emptied so I can count it as finishing up a project, right?
I found a partially done bookmark to work on next. The pattern is from one of my Alaska bookmarks. The picture makes it look like a variegated thread though it is not. Unfortunately, I lost the ball of the thread for this. I’m almost done but both shuttles are too low on thread to finish. Back in the UFO (Un-Finished Object) drawer.
I told myself I would work on UFOs before starting new projects. But I really need to stock up on bookmarks. Maybe I have another unfinished bookmark somewhere. I’ll have to look. If not, I’ll just have to start another project and finish it so as not to add to the UFOs.
The ‘Branson’ bookmark pattern can be found on my Pattern Page. I have not written out the Alaska bookmark.
“I just got out of the hospital. I was in a speed-reading accident. I hit a bookmark.” Steve Write
At work the other day I was waiting on decisions to be made and changes to be done by a couple of other people. I was listening and doing my part in the job but only so many people can fit in one small area at a time. While standing there I noticed a few thin wires on the floor that had been the tail of some cable or other. As they hadn’t quite made it to the trash yet I picked them up and started fiddling with them instead of throwing them away. Noticing the size, color and length I tried tatting with them.
I made the ring on the right first, then a smaller ring that didn’t close. With another couple of scrap wires, one green the other white, I made the rings with the chain between. I even joined the rings though I had not left a picot. There was still a lot of white wire left which I wound around the wire tails of the first two rings. I did not try tatting that part, my fingers were already feeling the strain of working with wire.
No, I did not use a shuttle to work with the wire, I finger tatted it. The shuttle is only for reference to the size of the wire tatting. The wire is about 24 gauge but due to the stiffness does not tat small. I made the white chain using direct tatting but the rings I did normally.
I knew that tatting with wire could be done; I’ve tried before but never with coated wire. It was challenging but fun. I don’t think I’d want to make any large project out of it though – talk about hard on the hands!
“Nobody is bored when he is trying to make something that is beautiful, or to discover something that is true.” William Ralph Inge www.brainyquote.com
A couple of weeks ago my mother wore a hat that she had picked up at a garage sale. It had a feather wrapped around it as a hat band, which was okay but she wanted something different. She took a hatband that I had made a long time ago and put it over the top of the feather. She liked this a lot better so we removed the feather.
I’m not sure when I tatted this hatband but it was at least 20 years ago. I believe I made it with Kreinik thread but I can’t tell you what color number. I know it is not blended with another thread. I remember it was not as easy to work with as cotton thread.
I have made several hatbands for my parents. My dad especially liked the ones made out of this kind of shiny thread. I don’t remember if I followed someone else’s pattern or did this one on my own. It’s not that complicated a pattern, it could be either one. It would make a pretty bookmark, wouldn’t it?
“And all your future lies beneath your hat.” John Oldham https://www.brainyquote.com
There are many beautiful tatted doily patterns out there – I have books full of them. The Internet has a lot, also. Do I make one of those? Of course not, that would be too easy. I designed another one.
A few years ago I made a snowflake/medallion with a finding in the center. I used that medallion as the center but made a ring of rings in place of the finding. That was the easy part. Some of the rounds went very smooth, the others took more thought. And several tries. The end result is a bit ruffle-y until it’s blocked, but still looks nice. This needs more blocking – it’s amazing how a picture will show things that ‘in person’ isn’t so obvious.
This doily is seven inches across made in Lizbeth #603 Ecru size 20 thread. I’m not sure of my aunt’s tastes in colors and decorating so chose a ‘traditional’ color. I noticed I put spokes in this doily like several of my other doilies. I need to try something else next time. Doing a little more planning in the beginning would probably help, don’t you think?
I had planned to mail it today but will block it a bit better first. I want it to look good when she gets it.
“Without leaps of imagination, or dreaming, we lose the excitement of possibilities. Dreaming, after all, is a form of planning. ” Gloria Steinem brainyquote.com
I received a unexpected gift in the mail a couple of months ago: a padded envelope with no return address. Wrapped in several layers of padding was an old metal shuttle.
A sweet aunt of mine found it in her sewing box. She’s not sure how long she had it. I’m pretty sure she doesn’t tat, either, but she knows I do and sent it to me.
It is a post shuttle with etchings on both sides but no company markings. There are gaps at both tips. Size 10 and 20 thread do not come unwound when the shuttle is hung to untwist the thread if done with care. I’m surprised but happy at this, the gaps look big. One end has a sharp point that looks bent, which I can’t decide if this is original or the last tatter bent it this way. It works great as a pick. The other end has been flattened a bit; I’m guessing this is not the original look. The shuttle has no rust or any other blemishes.
I don’t know how old this is. Who knows how long my aunt had it or if it was new when she got it? It doesn’t really matter, it is a wonderful gift, which I appreciate very much.
I’m working on a small doily to send her as a thank you. It’s the least I can do, don’t you think?
“The best gifts are those we not only cherish but put to use.” Les Brown www.brainyquote.com
I didn’t make snowflakes to go in Christmas cards this year. Instead I was inspired by LaceLovinLibraian Diane to tat Ice Drops. The only draw back is that I had to hand deliver them. I ended up not making as many for Christmas as I would have if they were flat and could be mailed.
These were a lot of fun to make. They also don’t take very long.
Diane inspired a lot of people to make these. I’ve seen them in different colors, too, with beads and sequins. I may eventually tat some in colors other than white, but for Christmas these worked out great.
I am now making a list of UTPs (Unfinished Tatting Projects). The goal is to finish those first before getting in to other projects.
Now to remember where I put all those UTPs.
“I recently took up ice sculpting. Last night I made an ice cube. This morning I made 12, I was prolific.” Mitch Hedberg
I still haven’t finished the dragon. The thread is dark enough that I need a well-lit area to work on it. I’m doing the head streamers and am having a bit of difficulty. Trying to hurry, maybe? When I have time to work on it I don’t have good lighting; when I have good lighting I don’t have time to work on it. It will get done – eventually.
Other than a couple of other small things that aren’t ready to be shared yet I haven’t done any tatting. Getting lazy, I guess.
We’ve been having problems with our Internet. We had trouble a week ago Saturday, called the provider and thought we had it fixed. Then we had trouble again. Again we called the provider, did a few more things and thought we had it fixed. The next day we lost the Internet and haven’t gotten it back yet. It is aggravating. We thought we might have it by today, but we didn’t.
As I don’t have any pictures of tatting ready I thought I’d share a couple of pictures of a visitor we had this week.
Saw this handsome fellow strutting through our yard. I snapped this picture through the window.
He left in a hurry as soon as we opened the door. It surprised me when I found I’d caught him in this picture. We’ve been hearing a lot of pheasant calls around so we know they are out there. This one just decided to brave the yard. We were lucky we caught sight of him.
I’m hoping to get my tatting enthusiasm back. Or back in gear, anyway. I’ve got lots of things I want to make.
“It’s not easy taking my problems one at a time when they refuse to get in line.” Ashleigh Brilliant